Can’t find what you’re looking for?
Search for it here.

SLIPKOTEĀ® AQUAPLEX 524

Description

SLIPKOTE AQUAPLEX 524 is a multi-service, non-melting, waterproof grease fortified with PTFE. It is designed specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions. SLIPKOTE AQUAPLEX 524 with its excellent film strength and extreme pressure qualities, forms a tough durable film of lubrication that prevents metal to metal contact.  SLIPKOTE AQUAPLEX 524 is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages


  • NSF/U.S.D.A. H-1 *Registered
  • WATERPROOF
  • NON-MELTING
  • KOSHER APPROVED
  • BIODEGRADABLE
  • CHEMICAL RESISTANT
  • NON STAINING
  • WIDE TEMPERATURE RANGE
  • REDUCES WEAR
  • PREVENTS RUST & CORROSION

*NSF H-1 Registration No. 059323


Usage

SLIPKOTE AQUAPLEX 524 with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces and slow to high speed bearings, operating in adverse conditions.  Because of its pure synthetic base, high load carrying capacity and wear protection characteristics, SLIPKOTE AQUAPLEX 524 is far superior to petroleum, white oil based greases on the market today.  This makes SLIPKOTE AQUAPLEX 524 a truly multi-service grease in both food grade and non food grade applications operating in temperatures from -10° F to 325°F.  Due to its NSF/U.S.D.A.  H-1 *Registration,  SLIPKOTE AQUAPLEX 524 is an excellent choice for both Food Processing plants, where equipment wash down is an everyday requirement and Water Industries, where contamination of conventional petroleum lubricants is a primary environmental concern. SLIPKOTE AQUAPLEX 524 is compatible with most rubbers and plastics and is a superior lubricant for "O" rings.  Some of its diversified uses include:


  • PUMP BEARINGS
  • BUSHINGS
  • CAN SEAMERS
  • VALVES
  • GASKETS AND "O" RINGS
  • CONVEYORS
  • STERILIZER CHAINS
  • SLIDES AND WAYS
  • POOL EQUIPMENT
  • ELECTRIC MOTORS
  • WATER FILTERS
  • UNIVERSAL JOINTS

Typical Specifications

  • Product: AQUAPLEX 524
  •  
  • Base Oil: Synthetic
  • Thickener: Synthetic
  • Texture: Smooth & Tenacious
  • Color: Translucent White
  • Solid Lubricant: PTFE
  • NSF/U.S.D.A. Rating: H-1
TEST
ASTM TEST
RESULTS
N.L.G.I. Grade
2
Worked Penetration
60 Strokes
D-217
280
10,000 Strokes
D-217
290
Base Oil Viscosity,
cSt @ 40°C
D-445
781
cSt @ 100°C
D-445
42
Pour Point, °F
D-566
-10
Flash Point, °F
D-92
325
Dropping Point, °F
D-566
NONE
Evaporation Loss, % , (10 hours @ 210°F)
D-972
1.5
Specific Gravity
ASTM-D-287
0.92
Corrosion Preventative Test
D-1743
PASS
Water Washout, % Loss
D-1264
1.9
Timken OK Load, lbs
D-2509
35
4-Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm, 167°F)
D-2266
0.50
Dielectric Strength, KV
D-877
30
WGK (German Water Classification)
1
The name of this product or group of products is for product identification only.  SPECIALTY LUBRICANTS Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  SPECIALTY LUBRICANTS Corporation sales personnel are not authorized to amend this warranty limitation.



Return

Copyright 2017, Specialty Lubricants Corporation. All rights reserved.